BNC probe with touch protection
high frequency measurement
XLSS-58 / XLSK-58
Coaxial test wire with touch protection. There are two types of wires, one with BNC male connectors at both ends and the other with male connectors at one end and female connectors at the other end. The BNC connector uses a nickel plated shielding layer, and the contact pins and sleeves of the inner wires are made of copper gold-plated material.
order No
model
Wire length L [CM]
67.9770- *
XLSS-58
Au Ni PVC
67.9773- *
XLSK-58
Au Ni PVC
XLSS-174
PVC insulated coaxial test wire with touch protection. Both ends are BNC male connectors. The BNC connector uses a nickel plated shielding layer, and the contact pins and sleeves of the inner wires are made of copper gold-plated material.
order No
model
Wire length L [CM]
67.9553- 21
XLSS-174
Au Ni PVC
XLSS/SIL
Silicone rubber coaxial test wire with touch protection, with BNC male connectors at both ends, can be used to connect measuring instruments, etc. The BNC connector uses a nickel plated shielding layer, and the contact pins of the inner wires are made of copper gold-plated material.
order No
model
Wire length [CM]
67.9756- *
XLSS/SIL
Au Ni SIL
XBS-58 / XBK-58
BNC male and female connectors with touch protection, used for producing BNC wires with touch protection (RG58). Adopting nickel plated shielding layer, the contact pins and sleeves of the inner wire are made of copper gold-plated material.
XBB-C58
BNC panel installation socket with touch protection, used for inserting BNC male connectors. The socket can be screwed into pre drilled panels made of plastic, metal, or other materials. The nickel plated shielding layer is used, and the contact sleeve of the inner wire is made of copper gold-plated material. Connect RG58 cable.
order No
model
shield connection
XBB-L / XBB-LL
BNC panel installation socket with touch protection, used for inserting BNC male connectors. The socket can be screwed into pre drilled panels made of plastic, metal, or other materials. The nickel plated shielding layer is used, and the contact sleeve of the inner wire is made of copper gold-plated material. XBBLL type extended shielding layer can achieve better radiation suppression effect under unplugged conditions. Welding.
order No
model
Shielding type
67.9571-*
XBB-LL
Au Ni Ag
XBB-P / XBB-PL
BNC panel installation socket with touch protection, used for inserting BNC male connectors. The socket can be screwed into pre drilled panels made of plastic, metal, or other materials. The nickel plated shielding layer is used, and the contact sleeve of the inner wire is made of copper gold-plated material. XBBPL type extended shielding layer can achieve better radiation suppression effect under unplugged conditions. Welding wires.
order No
model
Shielding type
67.9572-*
XBB-PL
Au Ni Ag
ISOPROBE IV – 10:1
The safe high-frequency 10:1 test probe adopts a compact design. The frequency range of this probe is wide and the input capacitance is low. High flexibility PVC insulated coaxial connecting wire, equipped with BNC plug with integrated compensation device. This device can be used to connect the reference wire at the front of the probe.
order No
model
Wire length [CM]
68.9366-12028
Isoprobe IV - 10:1
120
XBWB-P
BNC corner sockets with touch protection can be installed on printed circuit boards, and touch protection complies with IEC/EN 61010-1 regulations. The socket can be directly soldered onto the printed circuit board. By inserting test wires, the right angled shape can minimize the force transmitted to the printed circuit board.
During the process of connecting BNC cables, the socket plane can provide sufficient protection to prevent twisting.
The shielding layer of the socket consists of two semi-circular insulated contacts, which will be connected to each other when the plug is inserted (switch function). Four positioning pins are connected to the external shielding layer. The contact sleeve of the inner conductor of the BNC socket is made of copper gold-plated material.
Can be used for input terminals of high impedance insulated oscilloscopes, etc. The BNC socket with touch protection is compatible with conventional BNC connectors. However, with this combination, the 1000 V touch protection will no longer be applicable to the entire system.
order No
model
rated voltage
67.9569-*
XBWB-P
Maximum voltage 1000 V, CAT III
(600 V, CAT IV)
Au Ni
Adapter wire XLAM-414/SC
Shielded, high flexibility adapter wire. One end is a coaxial cable with a BNC male connector with touch protection, and the other end is a Ø 4 mm plug with a hard insulated sleeve, using MULTILAM technology.
order No
model
rated voltage
wire
67.9842-
XLAM-414/SC
1000 V, CAT II
600 V, CAT III
PVC RG58
Au Ni
67.9867-
XLAM-414/SC/SIL
1000 V, CAT II
600 V, CAT III
SIL SILI-SC 0,5/1,0
Au Ni
Adapter wire XLAM-446/SC
Shielded, high flexibility adapter wire. One end is a coaxial cable with a BNC male connector with touch protection, and the other end is a Ø 4 mm stacked plug with a hard insulated sleeve, using MULTILAM technology.
order No
model
rated voltage
wire
67.9800-
XLAM-446/SC
600 V, CAT II
300 V, CAT III
PVC RG58
Au Ni
67.9868-
XLAM-446/SC/SIL
600 V, CAT II
300 V, CAT III
SIL SILI-SC 0,5/1,0
Au Ni
XF-F
Wire coupler. The inner conductor and shielding layer are interconnected. The contact sleeve of the inner conductor of the BNC plug is made of copper gold-plated material.
order No
model
Rating
Frequency range
VSWR
67.9547-28
XF-F
1000 V, CAT II
(600 V, CAT III) / 1 A
DC … 500 MHz
< 1.3
Au Ni
XM-FF
The signal distributor has 3 BNC safety connectors. All inner conductors and all shielding layers are interconnected. The contact pins and sleeves of the inner conductor of the BNC plug are made of copper gold-plated material.
order No
model
Rating
Frequency range
VSWR
-
67.9783-21
XM-FF
600 V, CAT II
(300 V, CAT III) / 1 A
-
-
Au Ni
BNC BOX XBKS
The empty BNC box with touch protection is suitable for individual applications. The components in the box are connected using welding technology. BNC plugs can be easily inserted into these enclosures, for example, by directly plugging into an oscilloscope input socket or using it as an intermediate component for BNC wires. The contact pins and sleeves of the inner conductor of the BNC plug are made of copper gold-plated material.
order No
model
rated voltage
Hybrid Technical Consulting
Customizable Products
Installation & Commissioning
On-site Training and Guidance
