2mm and 4mm test clips
Testing and measuring accessories
Test clip KPS1/B2
The hook is made of hard copper alloy and can be used to connect IC pins, pins, or bare wires. Use spring pressure to fix the measured object at the tip of the insulator. Due to the very light weight of the clamp, the weight will not be added to certain critical connections during testing. The insulation seat contains a Ø 2mm hard socket.
order No
model
rated voltage
Crimp restriction
24.0139-*
KPS1/B2
30 VAC / 1 A
60 VDC / 1 A
max. 2 mm
Au
Test clip MICROGRIP-XB
Hard spring steel wire clip with gold plating. Use a Ø 2mm hard socket at the handle in conjunction with a Ø 2mm spring-loaded plug with a hard insulated sleeve.
order No
model
rated voltage
Crimp restriction
65.9187-*
MicroGrip-XB
Au
Test clip XKK-200
Crocodile clip with insulation protection, brass. Sawtooth shaped claws can grip thin wires. Use a Ø 2mm hard socket in conjunction with a Ø 2mm spring-loaded plug with a hard insulated sleeve.
order No
model
rated voltage
Test clamp wire XALF
PVC insulated high flexibility test wire, with a serrated test clip on one end and a Ø 2mm plug with a hard insulated sleeve on the other end, using MULTILAM technology.
order No
model
Rated voltage/rated current
wire
65.9185-*
XALF
PVC 0.75 mm²
Ni
Test clip SKPS-4
Test clamp with flexible rod and spring wire clamp, suitable for connecting with pins or wires that are not easily accessible. The rod is insulated with silicone, which has good heat resistance and can maintain high flexibility even at low temperatures. Use a Ø 4 mm hard socket at the handle in conjunction with a Ø 4 mm spring-loaded plug with a hard insulated sleeve.
order No
model
rated voltage
Test clip GRIP-A
With a hard hook clip, made of steel, it can be used to hook cables. Use a Ø 4 mm hard socket at the handle in conjunction with a Ø 4 mm spring-loaded plug with a hard insulated sleeve.
order No
model
rated voltage
Test clip APK-4
Insulated, Ø 4 mm, hard, brass. Needle shaped, with sharp serrations, upper jaw insulated.
order No
model
rated voltage
64.9209-*
APK-4
30 VAC / 10 A
60 VDC / 10 A
Ni
Crocodile clip SAGK4-K
A small brass alligator clip wrapped in insulating material on all sides. A serrated jaw can hold larger objects or thin wires. The Ø 4 mm hard socket located inside the insulation body is used in conjunction with a spring-loaded Ø 4 mm plug with a hard insulation sleeve.
order No
model
Rated voltage/rated current
Crocodile clip XKK-1001
A crocodile clip with full body insulation, made of brass and serrated jaw, can be used to clamp larger objects as well as thin wires. The Ø 4 mm hard socket located inside the insulation body is used in conjunction with a spring-loaded Ø 4 mm plug with a hard insulation sleeve.
order No
model
Rated voltage/rated current
Dolphin clip XDK-1033
The dolphin clip with full body insulation, made of brass and serrated jaw, can hold larger objects or thin wires. The Ø 4 mm fixed socket located inside the insulation body is used in conjunction with a spring-loaded Ø 4 mm plug with a hard insulation sleeve.
order No
model
Rated voltage/rated current
Dolphin clip XDK-1033/I-2
The dolphin clamp is insulated throughout the body, and insulation is used on the upper jaw to prevent accidental short circuits due to accidental contact when the clamp is opened. The upper part of the dolphin clip is equipped with a soft TPE insert, which can also enhance the adhesion of the clip. This product can be used for the measurement category of CATIV.
order No
model
Rated voltage/rated current
66.9561-*
XDK-1033/I-2
1000 V, CAT III / 19 A
600 V, CAT IV / 19 A
Ni
Test clamp wire XDLS-418
High flexibility test clamp wire, with a dolphin clamp with insulation around one end, serrated jaw can clamp larger objects or thin wires. The other end is a Ø 4 mm MULTILAM plug with a hard insulated sleeve.
order No
model
rated voltage
66.9531-150*
XDLS-418
1000 V, CAT III / 32 A
PVC 2.5 mm²
Ni
Test clip GRIP-DI
The test clamp made of strip steel is particularly suitable for connecting grounding poles and large cables. In order to improve the safety during connection, the lower jaw has an insulating protective outer layer. Use a Ø 4 mm hard socket at the handle in conjunction with a Ø 4 mm spring-loaded plug with a hard insulated sleeve. Equipped with a transparent fuse sleeve, it can accommodate high-power fuses measuring 10 mm x 38 mm in size.
Fuses need to be purchased separately.
order No
model
Rated voltage/rated current
66.9266-*
GRIP-DI
1000 V, CAT III / max. 16 A1)
Ni
Test clip AB200
The test clamp made of strip steel is particularly suitable for connecting grounding poles and large cables. In order to improve the safety during connection, the lower jaw has an insulating protective outer layer. The Ø 4 mm hard socket at the handle is used in conjunction with a Ø 4 mm spring-loaded plug with a hard insulated sleeve.
order No
model
Rated voltage/rated current
Flat test clip GRIP-FMA
Flat test clip, used for quickly and safely connecting busbars, such as synchronizing backup generators. During operation, establish reliable connections on both sides of the busbar through MULTILAM. The Ø 4 mm fixed socket on the pressure handle can be used in conjunction with a spring-loaded Ø 4 mm plug with a hard insulated sleeve.
order No
model
Rated voltage/rated current
Flat test clip GRIP-FMA
Flat test clip, used for quickly and safely connecting busbars, such as synchronizing backup generators. During operation, establish reliable connections on both sides of the busbar through MULTILAM. The Ø 4 mm fixed socket on the pressure handle can be used in conjunction with a spring-loaded Ø 4 mm plug with a hard insulated sleeve.
order No
model
Rated voltage/rated current
Hybrid Technical Consulting
Customizable Products
Installation & Commissioning
On-site Training and Guidance
